 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Are these compatible?
Yes, in as much as both ends will clamp the cable, so you could just cut the nipple off.
So does the lever end clamp the cable?
The post needs the nipple end on the transfer.
The Easton dropper post clamps the cable and nipple is used in the leaver.
Not compatable. I paired my Fox Transfer with a Wolftooth LA and it's worlds better than the original Fox lever.
Anyone know of a good lever that clamps the cable?
^^^ see post above yours 😀
Ah, ta.
Cheers Ian, just trying to save some coin. The wolftooth looks good but it is pricey.
Also can't decide if I need the easy pull one
Agree it is pretty pricey. I went for the light action one as have arthritis in thumb. I was genuinely surprised just how light the lever action is though.
The bontrager one clamps at the lever. Works well too.
Yeah, sorry, for some reason I read that the other way around. Thought you wanted and Easton post with a fox lever.
I've got the fox lever, wouldn't mind looking at the wolftooth light action for my Thomson. Partly because it would mount to my Hope brake levers.
I personally wouldn't pair the wolftooth LA lever with Hope ispec brakes. I use the standard one and have it fully inboard, I think the longer length of the LA lever would get in the way.
Cheers for that. Just how far inboard to you have it as I run my Hope brakes a long way in compared to other folks.
I have about an inch gap between the grip and shifter. The wolf tooth lever has about 1/4" of adjustment and I have it all the way in.