 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Topic starter
hi peeps
are all e-type front mechs the same size tried to fit one to a 98 scott g-zero and it fouls the cross brace on the swingarm you can just see the marks where it rubs on the photo
[IMG] 
[/IMG]
the mech is a shimano deore off a 2004 scott reflex 25
cheers si
Posted : 06/06/2011 6:36 pm
A dual pull won't fit. You need a bottom pull, which they don't make anymore. Possibly you need a specific bottom pull at that.
You could give the scott importer a call, I managed to get one off them. They do crop up on ebay but they're really fussy about wear so you need a good one to work.
Posted : 06/06/2011 6:39 pm
Topic starter
hi
cheers for that.
si
Posted : 06/06/2011 7:19 pm