 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Any tips and what hole saw size.
Is this the On-one rims? I used 32 mm holes and wouldn't want to go bigger than that really. I put a video up that hopefully helps.
I used shaggy's video and advice re: hole size and marking where the holes were to go.
I put the holesaw in a pillar drill and made a wooden platform for the rim to rest on. I went round with a pilot drill a bit smaller than the holesaw one to make sure the main bit didn't wander when starting it. Cleaned up after wards with a dremel with a small grinding bit in it.
I was quite pleased with the results - I think they were cleaner than I'd have got using a hand drill.
[URL= http://i239.photobucket.com/albums/ff167/LukeBurstow/DSC_0884_zps3db6e537.jp g" target="_blank">
http://i239.photobucket.com/albums/ff167/LukeBurstow/DSC_0884_zps3db6e537.jp g"/> [/IMG][/URL]
I've just stuck with the white rim tape on-one supplied with the rim;
[URL= http://i239.photobucket.com/albums/ff167/LukeBurstow/DSC_1282_zpswhukxybb.jp g" target="_blank">
http://i239.photobucket.com/albums/ff167/LukeBurstow/DSC_1282_zpswhukxybb.jp g"/> [/IMG][/URL]
Just google "drilling a fattys rim", there are loads of useful pictures and pov videos on this.