Disc brakes, retrac...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Disc brakes, retracting pistons

14 Posts
13 Users
0 Reactions
68 Views
 PTR
Posts: 0
Free Member
Topic starter
 

As above really, does any one have a clever method, or know of a tool for doing this?


 
Posted : 21/03/2013 8:59 pm
Posts: 0
Free Member
 

A cheap plastic tyre lever.


 
Posted : 21/03/2013 9:01 pm
Posts: 119
Free Member
 

I like to use my large pedros tyre lever. Works a treat and no sharp edges


 
Posted : 21/03/2013 9:02 pm
Posts: 760
Full Member
 

Superstar sell a tool for this


 
Posted : 21/03/2013 9:04 pm
Posts: 17187
Full Member
 

allen key in between, pull back evenly


 
Posted : 21/03/2013 9:07 pm
Posts: 65918
Free Member
 

Old pads in, inexplicably massive flathead screwdriver pushed inbetween.


 
Posted : 21/03/2013 9:08 pm
 PTR
Posts: 0
Free Member
Topic starter
 

I'll have a look at superstar, thanks, I've tried the others, to no success


 
Posted : 21/03/2013 9:39 pm
 JoeG
Posts: 0
Full Member
 

Park make one, the [url= http://www.parktool.com/product/hydraulic-piston-press-pp-1-2 ]PP-1.2[/url]

[img] [/img]

Northwind - Member

Old pads in, inexplicably massive flathead screwdriver pushed inbetween.

^ That's what I do a well.


 
Posted : 21/03/2013 9:53 pm
Posts: 17187
Full Member
 

£25 for that park thing !


 
Posted : 21/03/2013 10:15 pm
 P20
Posts: 4153
Full Member
 

Another vote for old pads and big flat screwdriver


 
Posted : 21/03/2013 10:17 pm
Posts: 1725
Free Member
 

I like to use the flat handle of a teaspoon. They are available in all good kitchens 😀


 
Posted : 21/03/2013 10:18 pm
Posts: 0
Free Member
 

Just a thought, but if lever is not shifting the pistons:

1. Are you sure they are not seized?
2. Have you tried cracking a bleed nipple open or opening the master cylinder (depending on type)?

Unless there is equal volume available in the system (ie, master cylinder level is lowish or can overflow/vent) then the fluid you are displacing by trying to spread the pistons has nowhere to go (unless a seal gives up...)

Obviously you may need to bleed after this depending on feel (you may want to anyway)

For tools, Avid do a little plastic wedge. A small wooden wedge should also do. Personally I use whatever lever I see fit between the old pads I'm planning to bin...


 
Posted : 21/03/2013 10:29 pm
Posts: 9
Free Member
 

Looking at that park tool, an old wooden chisel ground down a bit thinner would be very similar.


 
Posted : 21/03/2013 10:36 pm
Posts: 5297
Full Member
 

I once pulled the brake with the wheel off, literally pulling the bike out of the car ready to ride. Not too big a deal but a pain in the bottom non-the-less. Until my mate took out what looked like one of those spacers I should have had in to prevent such accidents...except it also had a wedge. Effortlessly pushed it in, pistons returned to their usual position and off we went riding.

He says he got it with the bike. It's functional simplicity still impresses me to this day but I've never actually seen one for sale anywhere.


 
Posted : 21/03/2013 10:43 pm
 Twin
Posts: 0
Free Member
 

The wedge thingy comes with avid brakes. Unfortunately you need to have avid brakes to get one. 😕


 
Posted : 21/03/2013 10:52 pm

6 DAYS LEFT
We are currently at 95% of our target!