 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Has anybody paid for themselves to do level 1 and level 2 Cytech qualification? I've been having a look through the bike mechanic jobs and they all want this qual so I'm considering paying for myself to get it to hopefully then be able to get a job in a bike shop. Or as a 32 year old female am I being a complete nutter?!
I have nothing other than this to offer
Or as a [s]32 year old[/s] female am I [s]being[/s] a complete nutter?!
😉
i started mine at 45 😀
Was it worth doing do you reckon?
I did this with ATG training...it was a good course and group and as all shops were looking for Cytech 2 and /or years of experience it was the only way in for me,chain stores are your friend here .....after 3 jobs I realised that the whole retail thing wasn't for me,basic pay,weekend/bank holiday working etc....I went back to enjoying bikes instead.
Good luck
If you can I would just try and get a job if at all possible, look at independents ask for a trail. The courses are pretty expensive. I managed to at a cycle surgery. I took along a wheel I had built as an example of work. Biggest thing I learnt on the job was replace cables if cables are involved. At home I would try and say agjust gears and brakes see how it went then replace cable if needed penny pinching. Not worth it in a shop for more Hassel for the customer.
Yeah I've seen a few jobs advertised at halfords and although I'm sure it would be abysmal wages I'm also hoping it would be a foot on the ladder. I did also see seasonal bike mechanics wanted so wondered if it would be a means to an end and a long term goal seeing as otherwise at end of August I'm off to France to live for a while.
As you've found, if you want to be a mechanic then you'll pretty much have to get the qualification, though you can also get the accreditation without taking the course (a much cheaper option)if you're already a capable mechanic.If i'm honest, level 2 is the absolute bare minimum most shops would need as it only covers the basic full strip/rebuild (inc. wheel build), a few years worth of additional experience of dealing with the full spectrum, BSO to high-end, will be far more valuable to an employer
Although Cyctec is a good basis, i suspect that most bike shops would prefer a good level of experience.
[url= http://www.bikeradar.com/road/gear/article/you-wont-believe-the-things-women-in-the-bike-biz-get-asked-44667/ ]http://www.bikeradar.com/road/gear/article/you-wont-believe-the-things-women-in-the-bike-biz-get-asked-44667/[/url]