[Closed] Cotic Escapade - arrived / built

[url= https://c1.staticflickr.com/1/343/32591437182_7ea959dd12_b.jp g" target="_blank">https://c1.staticflickr.com/1/343/32591437182_7ea959dd12_b.jp g"/> [/img][/url][url= https://flic.kr/p/RDZCNJ ]FB_IMG_1486387593753[/url] by [url= https://www.flickr.com/photos/151685445@N04/ ]Ryan Kent[/url], on Flickr

In my LBS for a few finishing touches 😀

Just using a standard 9mm QR up front?

yep pain in the ass to get the wheel on and off have to slacken caliper adaptor to give it a bit of wiggle room

I keep looking at the Alpkit 650b set to see if I can run a 9mm axle

<tart>

what bar tape is that?

</tart>

honourablegeorge - Member
<tart>

what bar tape is that?

</tart>

Looks like it could be the orange Salsa one, or the Easton one.

So, can anyone help me spec or order a road plus wheelset. I need 135mm QR rear and 9mm bolt through front. 650b rims. £300 or less?

Cheers

James

Bar tape is this stuff
http://www.tritoncycles.co.uk/components-c9/grips-tapes-c78/genetic-classic-cork-tape-p4799
in orange LBS told me its the same as whats used on the cotic full builds

I'm using std love mud 9mm qr on mine up front. Not noticed a difference from the supplied bigger one.

Burko,

All fits in the fork ok?

Any chance of a pic?

I've got a standard QR in mine. Fits in ok, does require a bit of a wiggle, well, manual handling but it works.

Have also had a 9mm bolt through QR, which I presume it's meant for, in there.

Building mine at present, got the BB & headset fitted at the mo and awaiting my Rival 1x11 parts. Ordered a pair of Juin Tech R1 brakes for stopping duties as I couldn't stretch to full hydro's. Should be complete in a month or so funds permitting and sourcing of a long cage Rival rear mech.