converting to singl...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] converting to single speed

5 Posts
6 Users
0 Reactions
51 Views
Posts: 0
Free Member
Topic starter
 

looking at converting my hard tail to ss , what is the best rear cog and spacer set to go for and what chain is best? would be gratful for some info


 
Posted : 20/02/2011 10:31 pm
Posts: 4
Free Member
 

http://www.velosolo.co.uk/index.html

Different width spacers to help fine tune


 
Posted : 20/02/2011 10:39 pm
Posts: 6902
Full Member
 

I always used to use bmx chains on the SS - worked well.


 
Posted : 20/02/2011 10:43 pm
Posts: 1617
Free Member
 

I got the Superstar wide base sprocket kit to prevent damaging my freehub. Also comes with lots of different sized spacers to fine tune chain line. Up front am running an On One stainless chain ring.

Oh and I use a KMC 610 singlespeed chain.


 
Posted : 20/02/2011 10:51 pm
Posts: 12
Free Member
 

I went with one of the kits from [url= http://www.bikemonger.co.uk/complete-one-speed-kits-1-c.asp ]Charlie the Bikemonger[/url] - good value and has everything you'll need. Been loving SS ever since!


 
Posted : 20/02/2011 11:21 pm
Posts: 363
Free Member
 

Get a chain that is the correct width. I got a SRAM PC1 1/8 chain and I kept having problems with the chain jumping especially under power. My cogs were all 3/32 width so I changed to a KMC 8 speed chain and have had no problems since.


 
Posted : 21/02/2011 8:48 am

6 DAYS LEFT
We are currently at 95% of our target!