You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Morning all...
Any issues with the parts below for converting my roadrat to 1 * 10?
[url= https://farm8.staticflickr.com/7730/17112203117_9dafefed66_b.jp g" target="_blank">https://farm8.staticflickr.com/7730/17112203117_9dafefed66_b.jp g"/> [/img][/url][url= https://flic.kr/p/s59vNM ]ScreenShot651[/url] by [url= https://www.flickr.com/people/11280082@N04/ ]too_tall_paul[/url], on Flickr
Going to want some gears for the Dunwich this year...
Cheers,
Paul
nope. I'd go kmc chain personally.
11-28 is what I run on my commuter, with a 39t ring. Works fine.
Which one Reggie?
I put my old 9spd stuff on mine with the existing alfine chainset. 11-32 I think on the back and I use them all.
Your setup might be cheaper with an MTB shifter/mech, for some reason the road flat bar shifters seem quite expensive.
I used to run 46 * 11-34t for london commuting and not-too-hilly touring on my hybrid.
Horatio - I noticed the cost of the shifter was high, but overall it equalises out because the rear mech is a lot cheaper.
I'm currently running a Doval narrow-wide but before that it was a Surly stainless ring.
Isn't the pull ratio different between road and mtb once you go 10 speed or is that 11?
+1 if you want more scope to go bigger at the back then an 10spd XT shifter and medium cage SLX mech would be an option. That would open up 11-32 and 11-34 cassettes and beyond.
XT pod - £27
http://www.chainreactioncycles.com/shimano-xt-m780-10-speed-trigger-shifter/rp-prod69488
SLX mech - £31
http://www.chainreactioncycles.com/shimano-slx-m670-shadow-10-speed-rear-mech/rp-prod83165
[there may be cheaper prices..]
Isn't the pull ratio different between road and mtb once you go 10 speed or is that 11?
yes but if the shifter and mech match then it's fine.
So, costs between road and mtb are identical...
I guess the mtb stuff could be re purposed as well.
Choices...