 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Bike Forum
2
Posts
2
Users
0
Reactions
132
Views
Topic starter
Si's off on his hols and the website's down.
Anyone know what front mech it needs, I'm guessing bottom pull but conventional or swinging type?
Posted : 07/06/2012 3:35 pm
The cable routing is under the BB shell and it's outer only from the shifter to the boss on the head tube.
The cable inners cross under the down tube and then go via the little doofer on the shell.
I fitted an SLX one with a low bracket to my HX2 if that's any help
Posted : 07/06/2012 4:17 pm
Topic starter
Cheers Si got back in touch,
For anyone googling this in the future, hello (and do you have next weekends lottery numbers?), it's 34.9mm and any bottom pull mech will fit/work with varying ammounts of rear tyre clerance.
Posted : 07/06/2012 4:32 pm