 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Where's the best place to get these from please? Seeing some on Wolftooth components. I think I need a 10mm bolt, but if you know a UK supplier then that would be great!
Thanks in advance.
30T will just need half a normal bolt I believe (if its the screw in type)
Hi Ben, you'd not happen to know the length of a normal bolt by any chance? I could maybe have a go at filing one down if I had to.
Cheers for the chaino link, the problem I have is described here:
No sure, but I dont think it will matter. 8/10/12 all should work the 30T rings are threaded all the way through. I can check what RF use tomorrow if you like.
Had a similar problem when I stuck a wolf tooth on SLX. Had to change the nuts to shallower ones (I think 5mm). The bolts themselves were fine. Was just what i could find in my parts bin. Didn't have the fouling problem though as it was 34t.
As per Ben the bolt will go the full way through the thread on the 30t rings. I have spaced my 30t inwards 3mm for a better chain line using a dpacer and used the Raceface poly bash bolt kit which is plenty long enough.