Chain suck. Any mag...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] Chain suck. Any magic fixes?

13 Posts
13 Users
0 Reactions
118 Views
Posts: 0
Free Member
Topic starter
 

Had horrendous chain suck all the way around Cannock today, didn't quite ruin the ride, but spoilt it a fair bit. Is there anything that I can do to minimise this? The chain is in ok condition and was well lubed, but it just keeps sucking up and jamming when I'm in granny gears.

I'm told that the clutch mechs can help with this, is that true or just marketing rubbish?


 
Posted : 05/01/2014 9:54 pm
Posts: 6978
Free Member
 

are the chainrings worn?
what lube is on the chain?
what frame is it?


 
Posted : 05/01/2014 9:56 pm
Posts: 0
Free Member
 

Is your chain too long? Happened to me before and shortening fixed it. Fact it's happening on the smaller ring suggests it could be your problem?


 
Posted : 05/01/2014 9:59 pm
Posts: 17
Free Member
 

Was the bike clean?
Chainring wear - flip the granny ring or rotate, how OKish is the chain - properly checked?
Chainsuck is normally where the chain wont release from the ring due to being hooked. A clutch mech will help to tension the chain but I wouldn't see how it will solve the issue.


 
Posted : 05/01/2014 10:00 pm
Posts: 97
Full Member
 

Time to micro-inspect...
Get someone to feather the back brake while you pedal slowly against it, & watch the chain as it's coming off the ring. Stiff link, burred teeth, bent teeth, etc.


 
Posted : 05/01/2014 10:05 pm
Posts: 0
Free Member
 

Ride along the flat?


 
Posted : 05/01/2014 10:08 pm
Posts: 507
Free Member
 

Quite often caused by burrs on the teeth as well as hooking, this can be reduced by taking them off with a small round file.


 
Posted : 05/01/2014 10:10 pm
Posts: 14595
Free Member
 

Coatesy +1, & I'm of the option a clutch mech will help avoid it for longer


 
Posted : 06/01/2014 12:04 am
Posts: 551
Free Member
 

alfine


 
Posted : 06/01/2014 8:27 am
Posts: 13192
Free Member
 

replace the granny ring is what I would do first, you will have to do it at sometime anyway and they cost less than a tenner and maybe take about 10-15 mins to replace.


 
Posted : 06/01/2014 9:02 am
 kilo
Posts: 6666
Full Member
 

I asked about this a couple of weeks ago and was advised new chainring, did this and had no problems whatsoever at a muddy brass monkeys at the weekend as mentioned it was a cheap fix


 
Posted : 06/01/2014 9:29 am
Posts: 17
Free Member
 

I asked about this a couple of weeks ago and was advised new chainring, did this and had no problems whatsoever at a muddy brass monkeys at the weekend as mentioned it was a cheap fix

there is also no magic in drivetrains 🙂


 
Posted : 06/01/2014 9:31 am
Posts: 0
Free Member
 

I get bad chainsuck on my C456 as soon as the chainrings wear even slightly, new chainrings fix it. Also new chain on worn chainrings is the worst combo for chain suck


 
Posted : 06/01/2014 11:13 am
Posts: 26
Free Member
 

Singlespeed.


 
Posted : 06/01/2014 11:15 am

6 DAYS LEFT
We are currently at 95% of our target!