 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
well?
nope. well certainly didnt used to be able to. need a bulb... or a pro 2.
yes
terry - serious?
Not according to Hope.
I'm all ears though.
thats good because showerman is all shite
Couldn't be when I asked Hope.
it cant. the OD of the bearings aint much bigger than 20mm...
Nope.
The ID (bore) of the 6001 2RS bearing is 12mm; so bearing in mind that the OD is only 28mm...
see... 28mm OD. would be shit all bearing that you could fit in that gap...
"would be shit all bearing that you could fit in that gap... "
you could try to find some bushings to fit .. what could go wrong?!
would be shit all bearing that you could fit in that gap...
Pro 2 bearings aren't much bigger. And yes, they can be a bit cack.
you could try to find some bushings to fit...
Who needs bushings? A few rounds of teflon tape should do the trick... 😉
You could probably convert to 15mm through axle ok, if you can find the right size bearings, but 20mm would be a squeeze.
ha ha. for all my jesting, my pro 2 does indeed feel like a hope xc with the bearings punched out and the axle just loose inside.. talk about play. the bearings last about 3 weeks for me...
You could probably convert to 15mm through axle ok, if you can find the right size bearings...
Good thinking; 6001 bearings are 12 x 28 x 8mm - 6902/61902 bearings are 15 x 28 x 7mm... 1mm thinner.