Hey so thought I'd ask on here as my googling is getting me confused.
I've picked up a cheap steel cx frame (charge filter) and I'm trying to build it as cheap as poss using scrounged bits.
I have a spare fsa bb30 crankset. The frame is a threaded 68mm shell that fits a standard shimano deore (is that hollow tech) bottom bracket.
My question, is there a threaded bottom bracket I can fit to use the bb30 crankset?
http://www.wiggle.co.uk/race-face-bsa-cinch-30mm-bottom-bracket/
looks like the above may work. Never tried it myself.
Hope do various BB to fit different shells / cranks.
[url= http://cdn.hopetechnology.netdna-cdn.com/wp-content/uploads/2014/03/BBSelectionTable_Finalweb.pdf ]HOPE Fitting PDF[/url]
Will the axle be long enough?
Goodoint, by eye looks like the axle won't be long enough with an external bb cup, so it either needs a no external cup bb which may not exist or I need a different crankset!