bontrager tlr flash...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] bontrager tlr flash charger users

7 Posts
7 Users
0 Reactions
87 Views
Posts: 0
Free Member
Topic starter
 

Looking at getting one of these just wanted to hear any users real views and if anyone has seen them cheaper than 75 quid online thanks.


 
Posted : 06/02/2016 8:42 pm
Posts: 2194
Full Member
 

That's cheap, go buy one superb!!!


 
Posted : 06/02/2016 8:58 pm
Posts: 0
Free Member
 

Had one since they first came out. Fantastic piece of kit. Has saved many a saturday afternoon which had been previously wasted with hours spent trying to seat a poor tyre/rim combo. Pressure gauge is also pretty accurate for a non digital one.

I've had one tyre blow off the rim twice in a row with it so don't have the tyre near your face. Very funny story behind this - it had been blown up and I asked OH to check the bead had sat properly, as he lifted it up to his face to see, it blew right off the rim with a massive white flash.


 
Posted : 06/02/2016 9:01 pm
Posts: 2124
Full Member
 

For working on tubeless tyres its ace, for general run of the mill track pump its a pain in the arse as the chamber has to equalise when you attach it to the tyre so you lose a fair bit of air initially. Just a niggle but it gets on my wick.

Pretty accurate gauge and well built so not all bad. 🙂


 
Posted : 06/02/2016 9:01 pm
Posts: 0
Free Member
Topic starter
 

Thanks for the replys. Ordering one now to save using all my c02 cans everytime I swap my tyres around.


 
Posted : 06/02/2016 9:05 pm
Posts: 19914
Free Member
 

Don't use it all the time for general duties. Lots of extra pumping to fill the chamber and the head doesn't last well under heavy use. Other than that, they work perfectly.


 
Posted : 06/02/2016 9:26 pm
Posts: 0
Free Member
 

Pump, lever, ride...... ish. One of my favourite bits of kit, takes the faff out of tubeless


 
Posted : 06/02/2016 9:28 pm
Posts: 4132
Full Member
 

general duties. Lots of extra pumping to fill the chamber and the head doesn't last well under heavy use. Other than that, they work perfectly.

Easy way round this. Once up to pressure flip the lever down again and the chamber stays at whatever pressure you leave the tyres at. No different from a normal pump then, you don't need to fill the chamber first.

They're brilliant, I got one as a surprise for my birthday, what a lucky boy.


 
Posted : 06/02/2016 9:29 pm

6 DAYS LEFT
We are currently at 95% of our target!