Just pulled apart my E-18 PF30 bottom bracket, to see if I can replace the bearings... and need a 31x41x7mm (inner/outer/width) bearing.
Anyone deal with a bearing supplier (or got an engineer book on bearings) and know if it's possible to get any?
I've check the simplebearing website and they say NO! Obviously...
I could get a 30x41x7mm, which would sit directly onto the crankset shaft, but would prefer to avoid this...
Is there a bearing number on the seal?
If I wanted a weird bearing i'd go to a weird bearing seller. We used to have one here.
try searching the enduro forkseals web site
njee the internals & seal are tiny, just fitted a new BB and popped the top hat, couldn't see a bearing number on the new one let alone the dirt encrusted old un.
Hmm I've bought off kaesae, so may send him a mail, cheers for the idea chaps.
Have to say, considering the side of the BB30 you'd assume they'd use a bigger more robust bearing that HT II, this is more unsubstantial if anything..
31 42 7 ?
6806