 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
I have just ordered a Kona Process and want to convert to 2 x 11 - what front mech will fit? Any help gratefully received!
cant see how a front mech would fit on any of the 2018 models
2017 & earlier yes you can
Infact I think I have a SRAM 2x10 mech and shifter from mine, was 10 speed, should still work with 11sp, be happy to part with for a bit of cash.
Either way you need an e-type mounted shifter.
G2 process, has no real way of mounting one
Sorry, its a 2017 - that would have been helpful in the original post.
Kimbers, what about cable routing? Thanks
what about cable routing ?
From memory on my 2017 134: I think there should be an internal cable route (inner only?) on the drive side of the downtube; entering near the headtube and exiting near the BB. Short section of outer from there, under the BB and up to a hole in the cross piece of the swingarm - I think there's one hole on centre and one offset, depending on what suits your mech. i.e. the cable would enter the mech from below.