A not very interest...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] A not very interesting question about brake pad life.

11 Posts
12 Users
0 Reactions
45 Views
Posts: 23107
Full Member
Topic starter
 

How long do you get out of yours?

Mine are about halfway worn after 1600 km / 10 months. Am I not trying hard enough?


 
Posted : 01/12/2015 1:03 pm
Posts: 12467
Full Member
 

Harry "No Brakes" the Spider.

Trying too hard, I'd say. You should brake more.

Careful, now.


 
Posted : 01/12/2015 1:12 pm
Posts: 0
Free Member
 

Erm a long time. Several months maybe a year. Same for drivetrains and BBs

Tend to ride everywhere at the same speed 🙂


 
Posted : 01/12/2015 1:20 pm
Posts: 0
Free Member
 

Commuter roady....10 days.
Cx at HtN....2 hours.
Mtbs...I can't remember actually replacing any (not to say I never have...just can't remember doing it).


 
Posted : 01/12/2015 1:23 pm
Posts: 3371
Free Member
 

depends where you ride as well. Around here pads last ages. At a certain race in Scotland, they can last less than 3 miles....


 
Posted : 01/12/2015 1:28 pm
 Yak
Posts: 6920
Full Member
 

Ages usually - probably a year.
Kielder was bad too - only 1/2 lap out of 2 pairs. (Very wet - lots of sandy grinding paste everywhere)


 
Posted : 01/12/2015 1:30 pm
Posts: 129
Free Member
 

You wont get a definitive answer as there are too many variables.
But just to list a few

Pad Compound
Riding conditions
Riding type
Ground type e.g. gritty mud
The type of braking you do e.g dragging vs late hard braking
Amount of use within time frame
Bedding in correctly (arguable but I always bed mine in)
Disk design, Some are known to eat pads.
Pad quality.

I only ever use genuine hope pads and they last ages. I stupidly bought 4 sets of superstar once and they lasted minutes before the friction material fell of the backing plates.

I remember reading something about hard braking being better as it continually glazes over the top layer of the pad making harder and longer lasting vs dragging a brake which exposes new material causing it to wear down faster.

The type of riding will also affect the lifespan. I have some avid juicy 3 that came on my commuter and they are still on the same pads as the day i bought it about 6 years ago. I ride it 8 miles 5 days a week but only probably brake 3 or 4 times per journey.

Edit: I have also stopped bothering with sintered pads as the hope organics last so long


 
Posted : 01/12/2015 1:32 pm
 grey
Posts: 104
Full Member
 

Scottish borders and Central Scotland trails for me, probably last about 3 to 6 months. Back ones usually wear out first.
I did wear a set out in one loop of Dalby once, Shimano resin ones.


 
Posted : 01/12/2015 1:38 pm
 D0NK
Posts: 592
Full Member
 

I find that usually if I manage to bed a set of pads in properly, over a few rides [i]in half decent weather[/i], then they last a while. Pads fitted mid winter will soon be down to their backing plates.

Loads of other factors at play tho so ymmv basically.


 
Posted : 01/12/2015 1:43 pm
Posts: 0
Free Member
 

I was really impressed with the stock SLX pads - they lasted over a year. Then I went through a set in 2 hrs at Thetford. Muddy sand does not help!


 
Posted : 01/12/2015 1:44 pm
Posts: 28475
Free Member
 

My last Shimano Resin set must've managed more than 1000 miles. Not holding out any hope for the Superstar organics that I popped in as a stopgap measure.


 
Posted : 01/12/2015 1:45 pm
Posts: 402
Free Member
 

I've read about people getting through a set of MTB pads in one ride. I never believed it...

..until I went to Cannock this weekend. Rear brakes completely down to the metal despite loads of life beforehand. Very grateful to Superstar and their 35% discount today 😀


 
Posted : 01/12/2015 1:47 pm

6 DAYS LEFT
We are currently at 95% of our target!