Topic starter
Just fitted a pair of these to my lads bike, I'm just looking for some info on what air pressures people are putting in to gain the correct sag? Any info welcome.
Posted : 01/03/2017 7:47 pm
the air pressure required for the correct sag lol
Posted : 02/03/2017 9:23 am
Correct sag should be 25-30% of the travel, use whatever PSI is required to achieve this. My son has the same fork, iirc, its not alot.
Posted : 02/03/2017 9:41 am
too much air = firm fork
too little = soft fork, bottoms out
just right air = in between
Posted : 02/03/2017 11:22 am
Topic starter
I've set the sag @ 30% which is about 15psi but the fork doesn't feel right as it's not retuning to the sag point..strip down and service tonight I think.
Posted : 02/03/2017 11:24 am
My lad has the minimum psi in his as he's so light. Obviously take after his mum!!
Posted : 02/03/2017 11:36 am
