11-32 on a short ca...
 

  You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more

[Closed] 11-32 on a short cage Di2 6870 Di2 with 52/36 chainrings ?

13 Posts
10 Users
0 Reactions
201 Views
 womp
Posts: 0
Free Member
Topic starter
 

Hi

Can I swap my 11-28 for 11-32 and keep my short derailleur ? (Di2 6870 Di2, 52/36 chainrings)


 
Posted : 02/05/2016 8:34 am
Posts: 0
Free Member
 

There was a write up in the etc magazine a while back where a chap did similar with a short cage ultegra rear mech.

He used a linderets road link doofer on the mech hanger to make it work.

[img] [/img]


 
Posted : 02/05/2016 8:41 am
Posts: 6409
Free Member
 

OP I ran exactly that combo with no issues (albeit with a 9070 Di2 mech)

Doesn't require the road link


 
Posted : 02/05/2016 8:50 am
Posts: 0
Free Member
 qtip
Posts: 899
Free Member
 

Didn't work with my 5800 105 short cage mech, even with a longer b-tension screw. Not enough clearance on 32T cog, and angle of b-tension screw meant that only a little length could be added before it missed the lip on the gear hanger. Bodged it for one ride by adding nut to end of screw so that it caught the hanger, but shifting wasn't as good, mech angle was weird, and chain didn't wrap around much of the cassette. Just replacing the cage wouldn't fix this issue.


 
Posted : 02/05/2016 11:47 pm
Posts: 23277
Free Member
 

Someone panicking about the Fred?


 
Posted : 03/05/2016 5:22 am
 teef
Posts: 0
Free Member
 

Just get yourself fitter


 
Posted : 03/05/2016 6:10 am
Posts: 0
Full Member
 

I had to go medium cage Ultegra on my Tripster, to swap between road (11-28) and grrrrrravel (11-32) cassette. Compact up front though, couldn't you borrow one of those if it's a one off, or buy if it's long term?


 
Posted : 03/05/2016 10:23 am
Posts: 8469
Full Member
 

The official answer is no, but the shape of some mech hangers will allow it.


 
Posted : 03/05/2016 10:25 am
 womp
Posts: 0
Free Member
Topic starter
 

dirtyrider - Member
OP I ran exactly that combo with no issues (albeit with a 9070 Di2 mech)

What bike are you on ?

jam bo - Member
Someone panicking about the Fred?

lol no its for LEJOG

teef - Member
Just get yourself fitter

i will try!! tbh im normally fine on the 11-28 but ive just done 4 consecutive 90 mile days and i was feeling the 'less fresh' on the climbs near the end so my thought process was if i can get an 11-32 cassette to take the sting out of a climb then i may as well as i dont see any significant drawback.

The official answer is no, but the shape of some mech hangers will allow it.

Its a Canyon Aeroad with hanger 25


 
Posted : 04/05/2016 7:49 am
Posts: 6409
Free Member
 

What bike are you on ?

2010 Cannondale Supersix Hi-Mod

then a 2016 Giant Defy Advanced


 
Posted : 05/05/2016 8:02 pm
Posts: 6409
Free Member
 

i will try!! tbh im normally fine on the 11-28 but ive just done 4 consecutive 90 mile days and i was feeling the 'less fresh' on the climbs near the end so my thought process was if i can get an 11-32 cassette to take the sting out of a climb then i may as well as i dont see any significant drawback.

road link and a XT 11-40?


 
Posted : 05/05/2016 8:03 pm
Posts: 0
Free Member
 

I've got it to work on my gravel bike (without a road link but using short cage di2 mech) albeit I'm running a single ring on the front.


 
Posted : 05/05/2016 8:26 pm
 womp
Posts: 0
Free Member
Topic starter
 

i had a look at the road link an the website says:

11s Cassette Compatibility:
11-32: Not Required (GS medium cage rear derailleur works)

i will try the 11-32 with the SS this weekend, if it does not work i may get a GS


 
Posted : 10/05/2016 8:37 am

6 DAYS LEFT
We are currently at 95% of our target!