 You don't need to be an 'investor' to invest in Singletrack: 6 days left: 95% of target - Find out more
Might have been covered somewhere before, but I can't find if.
Does anyone produce converters to adapt 100mm front hub to 135mm with a working disc brake?
I know that there's a shed load of compromises but have a dynamo hub that I'd like to periodically run in my Jones fork and don't want to have to invest in a specific wheel.
Cheers
Clump
Presuming it's a shimano hub. [url] http://www.amazon.co.uk/Bicycle-Road-Holes-Front-Wheel/dp/B00CJCT080%3FSubscriptionId%3DAKIAILSHYYTFIVPWUY6Q%26tag%3Dduc08-21%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB00CJCT080 [/url]
Rip the axle outta this then cut a groove shallow groove to allow the dynamo gubbins to exit and space out your disc rotor (assuming 6 bolt).
otherwise naw.
This also presumes the write-up on this hub is correct. who knows.