2018 Whyte T130 RS trail bike
Medium
This was my sons bike, but he’s outgrown it now.
Pretty standard, but a few changes from original spec – 140mm air shafted fitted in forks (old one included as well), different brakes and dropper to originals, better Maxis Minion tyres, Nukeproof saddle, Ergon lock on grips but stated below.
Bike is sound – few marks associated with use. There is slight play in the bearings on the rear triangle at the far point (near the cassette).
Forks and shock hold air. Tyres set up tubeless. Dropper works great. Gears indexed well. New pads in the brakes so a bit squeally. Pedals not included.
This bike won numerous awards back in 2018,
Full specs and geomentry here:
https://99spokes.com/en-GB/bikes/whyte/2018/t-130-rs
Specs.
-Frame
Aluminum
BB Standard: BSA, 73mm, Threaded
-Fork
FOX Float Performance Elite 34, 3-position FIT4 damper, tapered steerer, black coating, 110x15mm Boost E-thru axle.Travel: 140mm
-Shock
FOX Float DPS Performance, black coating, rebound adjustment, 3-positions adjust, EVOL Travel: 130mm
-Bottom Bracket
Race Face BSA, 73mm
– Headset
FSA No. 57E Orbit ZS, 1.5″ cartridge sealed lower bearing, 1.125″ upper bearing
– Stem
Whyte Gravity, 40mm length (S/M), 50mm length (L/XL)
-Handlebar
Whyte Custom alloy 6061, low rise, 760mm width (30mm rise and 780mm width on XL)
-Saddle
Nukeproof
– Seatpost
Brand X Ascend dropper 120mm
– Grips
Ergon lock on
-Groupset
Shimano XT M8000, Shadow Plus, direct mount, 11-speed Rear Derailleur
Race Face Turbine Cinch, 30mm alloy Boost axle cramk
Shimano XT M8000, I-spec II, 11-speed shifters
Shimano XT M8000, 11-46 tooth, 11-speed Cassette
-Brakes
Avid XO Trail
– Wheels
WTB STp i29, TCS System, sleeved joint, 32 hole, 29mm internal width rims
Front: alloy, double sealed cartridge bearing, 32 hole, 110x15mm Boost,
Rear: Hope Pro 4, stainless steel bearings, 11-speed Shimano freehub, 32 hole, 148x12mm Boost
Tires
Maxxis Minnion DHF and DHR
Pick up from High Wycombe or message for potential meet.